The hottest sword refers to overcapacity, and the

2022-08-12
  • Detail

Sword refers to overcapacity: the iron and steel industry implements new regulations to raise the access threshold

sword refers to overcapacity: the iron and steel industry implements new regulations to raise the access threshold

China Construction machinery information

Guide: overcapacity is definitely a stubborn disease in the iron and steel industry, and this old problem becomes particularly prominent when demand is depressed. In order to control production capacity and cope with increasingly stringent environmental protection requirements, since October 1, the standard conditions of the steel industry (2012, when the lower collet clamping button was pressed to clamp the test piece, the situation was normal, which may indicate that the working oil circuit was not smooth when the lower collet was loosened) have been officially implemented. Analysts pointed out that this new regulation

overcapacity is definitely a stubborn disease in the steel industry, and this old problem becomes particularly prominent when demand is depressed. In order to control production capacity and cope with increasingly stringent environmental requirements, the steel industry specification conditions (2012 Revision) has been officially implemented since October 1. Analysts pointed out that this new regulation is equivalent to raising the entry threshold of the industry, but at the same time, for the chaotic industry, how much effect this policy can play is really confusing

improvement of production standards

it is reported that the normative conditions point out that the Ministry of industry and information technology regularly accepts applications from steel enterprises that meet the normative conditions, and relevant enterprises submit them to the Ministry of industry and information technology after passing the level by level review; The Ministry of industry and information technology will publicize the enterprises that meet the standard conditions after verifying the application enterprises, and will announce them after there is no objection. Enterprises that meet the standard conditions will be used as the basic basis for relevant policy support; No policy support will be given to enterprises not listed in the announcement list

in terms of energy consumption, the new edition of the standard conditions for production and operation of the steel industry puts forward that "the consumption of fresh water per ton of steel shall not exceed 4.1 cubic meters". Compared with the "consumption of fresh water per ton of steel is not more than 5 tons" stipulated in the 2010 edition of the standard conditions for production and operation of the iron and steel industry, the standard has been increased by nearly 20%

in terms of environmental protection, the 2010 edition of the standard conditions for production and operation of the iron and steel industry stipulates that "the emission of sulfur dioxide per ton of steel shall not exceed 1.8 kg", and in the new regulations, "the emission of sulfur dioxide per ton of steel shall not exceed 1.63 kg". On the whole, the new edition of the standard conditions for production and operation of the iron and steel industry has made more detailed provisions on the subdivisions of water, atmosphere, noise, solid waste, hazardous waste and other fields in terms of environmental protection

sword refers to overcapacity

as we all know, overcapacity has always been a major worry in the steel industry. Wu Xichun, honorary president of the China Iron and Steel Industry Association, has publicly pointed out that there are problems of concealment and misrepresentation in domestic steel production. In fact, this problem has a long history, and even has long been an "open secret" of the industry. It is also because of self deception that the iron and steel industry clamors to reduce production and eliminate non corrosive media every year; After the production capacity, but the annual output remains high. When overcapacity meets sluggish demand, the domestic steel industry is forced into a situation that may collapse at any time. According to the statistics of China Iron and Steel Industry Association, in the first half of this year, the accumulated profits of its member iron and steel enterprises were only 2.385 billion yuan, and the loss of loss making enterprises was 14.248 billion yuan, with a loss surface of 33.75%

an industry analyst said that the introduction of the new edition of the standard conditions for the production and operation of the steel industry is on the one hand because the steel industry is an industry with overcapacity, and previous policies have not achieved immediate results. In this case, through market regulation, it is necessary to improve environmental protection requirements, and eliminate backward production capacity by implementing energy-saving and emission reduction technological transformation and controlling the export of low value-added products, Promote energy conservation and emission reduction in the iron and steel industry; On the other hand, worldwide, the requirements for environmental protection are getting higher and higher. It is a general trend to revise industry norms to strengthen the awareness and level of environmental protection

relying on policies depends more on the market

but some analysts pointed out that compared with the previous version, the new regulations have cancelled the requirements of project approval or filing for approval. Before, regardless of whether the project was approved or not, it can now apply to the Ministry of industry and information technology, which also means that a number of "black household production capacity" that meets the new regulations will be expected to be washed out. At present, the domestic steel production capacity has exceeded 900 million tons, and it is estimated that about half of the production capacity can have perfect approvals. Among the iron and steel "black households" built before approval, the universal experimental machine is the product of the combination of modern electronic technology and mechanical transmission technology. Most of it comes from China. It is necessary to check whether the power supply is a normal small iron and steel enterprise. If the Ministry of industry and information technology opens up a side for the production capacity of these black households, the future iron and steel production capacity may expand more unscrupulously

in this regard, some insiders said that there may indeed be various problems in the implementation of the new regulations. However, from another perspective, regulating the industry requires not only policy guidance, but also the use of market forces to eventually merge or completely eliminate small steel enterprises that fail to meet the standards

Copyright © 2011 JIN SHI